|
|
|
|
|
|
|
|
| Click your selection | Quantity | Price Each |  | 1.0 | $169.95 |
Part Description:
Camshaft - 22RE/RET EFI Pro Cam
|
More Information |
|
|
Camshaft - 22RE/RET EFI Pro Cam
LCE's EFI Pro Camshaft is an excellent upgrade to any mild engine application that requires the use of the factory fuel injection setup. This cam is also designed to work with the factory valve train components so you will not have to upgrade springs, retainers etc... With a smooth idle and broad power band, this cam will allow your 22R/RE to run better and still retain it's drivability. LC Engineering is constantly striving to improve both the quality and performance of our products. We test our camshafts on the street, race track and off-road. The results are an improved line of camshafts that offer a broader selection of grinds, increased horsepower and higher quality. All LC Engineering Camshafts are ground on new billets and double heat treated for long life. Each has been designed for maximum torque and horsepower, specifically for application. When comparing camshaft profiles, always reference the duration @ .050" valve lift. We also stock circle track "Limited Class" camshafts and can custom grind to your specifications. Choosing the correct camshaft and matching valve train components is crucial for maximum performance and reliability. LC Engineering offers a full selection of valve train components throughout this catalog. Questions? Call our customer service department for a recommendation. We'll make sure to get you the perfect cam to maximize your combination!
20R/22R - EFI Pro Camshaft
Smooth Idle (1200-5000 rpm range)
Throttle Body, Filter Charger, 1 1/2" Header
|
Intake |
Exhaust |
|
| Valve Lash |
.008 |
.012 |
|
| Valve Lift |
440 |
440 |
|
| Advertised Duration |
280° |
280° |
|
| Duration @ .050" |
230° |
230° |
|
| Lobe Center |
102° |
118° |
|
| Intake Opens |
13° BTDC |
|
| Intake Closes |
37° ABDC |
|
| Exhaust Opens |
45° BBDC |
|
| Exhaust Closes |
5° ATDC |
|
NOTE: Always check valve to piston clearance and valve to valve clearance with this camshaft! Failure to install this cam with matched valve train components can cause engine damage.
WARNING: LCE highly recommends using our Pro Camshaft Kit (Part# 1020000) or Double Spring & Retainer Kit (Part# 1023210) when running any cam with over .460" lift or in any application that requires a sustained RPM of 6,000 or higher. LCE also recommends replacing rocker arms with a new set (Part# 1023015) or a complete rocker assembly(Part# 1023018) to avoid any damage to your new camshaft.
LCE will NOT warranty any cam damage if you do not purchase rocker arms or a complete rocker arm assembly with the cam.
Contact our Tech Support Line for further information at 928-855-6341.
Check out www.LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
|
Note: Images are for illustration purposes only. Images MAY NOT represent the product listed. Please contact Customer Service with any questions or concerns: 928-505-2501.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|